- dev - passt

[PATCH v2 00/12] RFC: Improve forwarding data structure
by David Gibson 19 Dec '25

19 Dec '25

This replaces the existing data structures storing forwarding information, with new ones that can store more detailed and flexible information, Eventually we plan to allow dynamically updating this as well. Patches 1, 2 & 8 could be merged (1 & 2 are the same as the the earlier series with cleanups to the listening socket init functions). The rest are just for early review. Since I'm going to be away for the next two weeks, no rush at all. v2: * Remove preliminary patches already merged * Add several patches actually using the new data structure David Gibson (12): tcp: Combine tcp_sock_init_one() and tcp_sock_init() into tcp_listen() udp: Rename udp_sock_init() to udp_listen() with small cleanups conf, fwd: Keep a table of our port forwarding configuration conf: Accurately record ifname and address for outbound forwards conf, fwd: Record "auto" port forwards in forwarding table tcp, udp: Make {tcp,udp}_listen() return socket fds fwd: Make space to store listening sockets in forward table ip: Add ipproto_name() function fwd, tcp, udp: Set up listening sockets based on forward table tcp, udp: Remove old auto-forwarding socket arrays fwd: Generate auto-forward exclusions from socket fd tables tcp: Remove unused tcp_epoll_ref conf.c | 125 +++++++++++++++++--------- fwd.c | 273 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- fwd.h | 49 ++++++++++- ip.c | 26 ++++++ ip.h | 2 + tcp.c | 190 +++------------------------------------ tcp.h | 17 +--- udp.c | 140 ++--------------------------- udp.h | 8 +- 9 files changed, 447 insertions(+), 383 deletions(-) -- 2.52.0

1 10

[PATCH v2 04/12] conf: Accurately record ifname and address for outbound forwards
by David Gibson 19 Dec '25

19 Dec '25

-T and -U options don't allow specifying a listening address. Usually this will listen on *%lo in the guest. However on kernels without unprivileged SO_BINDTODEVICE that's not possible so we instead listen separately on 127.0.0.1 and ::1. Currently that's handled at the point we actually set up the listens, we record both address and ifname as NULL in the forwarding table entry. That will cause trouble for future extensions we want, so update this to accurately create the forwarding table: either a single entry with ifname == "lo" or two entries with address of 127.0.0.1 and ::1. As a bonus, this gives the user a warning if they specify an explicit outbound forwarding on a kernel without SO_BINDTODEVICE. The existing warning for missing SO_BINDTODEVICE (incorrectly) only covers the case of -T auto or -U auto. Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au> --- conf.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/conf.c b/conf.c index ae2dc3e1..af9e82f5 100644 --- a/conf.c +++ b/conf.c @@ -157,12 +157,6 @@ static void conf_ports_range_except(const struct ctx *c, char optname, optname, optarg); } - if (ifname && c->no_bindtodevice) { - die( -"Device binding for '-%c %s' unsupported (requires kernel 5.7+)", - optname, optarg); - } - for (base = first; base <= last; base++) { if (bitmap_isset(exclude, base)) continue; @@ -202,8 +196,27 @@ static void conf_ports_range_except(const struct ctx *c, char optname, } } - fwd_table_add(fwd, flags, addr, ifname, - base, i - 1, base + delta); + if ((optname == 'T' || optname == 'U') && c->no_bindtodevice) { + /* FIXME: Once the fwd bitmaps are removed, move this + * workaround to the caller + */ + ASSERT(!addr && ifname && !strcmp(ifname, "lo")); + warn( +"SO_BINDTODEVICE unavailable, forwarding only 127.0.0.1 and ::1 for '-%c %s'", + optname, optarg); + + if (c->ifi4) { + fwd_table_add(fwd, flags, &inany_loopback4, NULL, + base, i - 1, base + delta); + } + if (c->ifi6) { + fwd_table_add(fwd, flags, &inany_loopback6, NULL, + base, i - 1, base + delta); + } + } else { + fwd_table_add(fwd, flags, addr, ifname, + base, i - 1, base + delta); + } base = i - 1; } @@ -350,6 +363,15 @@ static void conf_ports(const struct ctx *c, char optname, const char *optarg, } } while ((p = next_chunk(p, ','))); + if (ifname && c->no_bindtodevice) { + die( +"Device binding for '-%c %s' unsupported (requires kernel 5.7+)", + optname, optarg); + } + /* Outbound forwards come from guest loopback */ + if ((optname == 'T' || optname == 'U') && !ifname) + ifname = "lo"; + if (exclude_only) { /* Exclude ephemeral ports */ for (i = 0; i < NUM_PORTS; i++) -- 2.52.0

1 0

[PATCH v2 03/12] conf, fwd: Keep a table of our port forwarding configuration
by David Gibson 19 Dec '25

19 Dec '25

At present, we set up forwarding as we parse the -t, and -u options, not keeping a persistent data structure with all the details. We do have some information in struct fwd_ports, but it doesn't capture all the nuance that the options do. As a first step to generalising our forwarding model, add a table of all the forwarding configured to struct fwd_ports. For now it covers only explicit forwards, not automatic, and we don't do anything with it other than print some additional debug information. We'll do more with it in future patches. Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au> --- conf.c | 83 +++++++++++++++++++++++++++++++++++++--------------------- fwd.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++++ fwd.h | 33 ++++++++++++++++++++++- 3 files changed, 161 insertions(+), 31 deletions(-) diff --git a/conf.c b/conf.c index 84ae12b2..ae2dc3e1 100644 --- a/conf.c +++ b/conf.c @@ -137,7 +137,7 @@ static int parse_port_range(const char *s, char **endptr, * @last: Last port to forward * @exclude: Bitmap of ports to exclude * @to: Port to translate @first to when forwarding - * @weak: Ignore errors, as long as at least one port is mapped + * @flags: Flags for forwarding entries */ static void conf_ports_range_except(const struct ctx *c, char optname, const char *optarg, struct fwd_ports *fwd, @@ -145,10 +145,11 @@ static void conf_ports_range_except(const struct ctx *c, char optname, const char *ifname, uint16_t first, uint16_t last, const uint8_t *exclude, uint16_t to, - bool weak) + uint8_t flags) { + unsigned delta = to - first; bool bound_one = false; - unsigned i; + unsigned base, i; int ret; if (first == 0) { @@ -162,37 +163,48 @@ static void conf_ports_range_except(const struct ctx *c, char optname, optname, optarg); } - for (i = first; i <= last; i++) { - if (bitmap_isset(exclude, i)) + for (base = first; base <= last; base++) { + if (bitmap_isset(exclude, base)) continue; - if (bitmap_isset(fwd->map, i)) { - warn( -"Altering mapping of already mapped port number: %s", optarg); - } + for (i = base; i <= last; i++) { + if (bitmap_isset(exclude, i)) + break; - bitmap_set(fwd->map, i); - fwd->delta[i] = to - first; + if (bitmap_isset(fwd->map, i)) { + warn( +"Altering mapping of already mapped port number: %s", optarg); + } - if (optname == 't') - ret = tcp_listen(c, PIF_HOST, addr, ifname, i); - else if (optname == 'u') - ret = udp_listen(c, PIF_HOST, addr, ifname, i); - else - /* No way to check in advance for -T and -U */ - ret = 0; + bitmap_set(fwd->map, i); + fwd->delta[i] = delta; + + if (optname == 't') + ret = tcp_listen(c, PIF_HOST, addr, ifname, i); + else if (optname == 'u') + ret = udp_listen(c, PIF_HOST, addr, ifname, i); + else + /* No way to check in advance for -T and -U */ + ret = 0; + + if (ret == -ENFILE || ret == -EMFILE) { + die( +"Can't open enough sockets for port specifier: %s", + optarg); + } - if (ret == -ENFILE || ret == -EMFILE) { - die("Can't open enough sockets for port specifier: %s", - optarg); + if (!ret) { + bound_one = true; + } else if (!(flags & FWD_WEAK)) { + die( +"Failed to bind port %u (%s) for option '-%c %s'", + i, strerror_(-ret), optname, optarg); + } } - if (!ret) { - bound_one = true; - } else if (!weak) { - die("Failed to bind port %u (%s) for option '-%c %s'", - i, strerror_(-ret), optname, optarg); - } + fwd_table_add(fwd, flags, addr, ifname, + base, i - 1, base + delta); + base = i - 1; } if (!bound_one) @@ -262,7 +274,7 @@ static void conf_ports(const struct ctx *c, char optname, const char *optarg, conf_ports_range_except(c, optname, optarg, fwd, NULL, NULL, 1, NUM_PORTS - 1, exclude, - 1, true); + 1, FWD_WEAK); return; } @@ -347,7 +359,7 @@ static void conf_ports(const struct ctx *c, char optname, const char *optarg, conf_ports_range_except(c, optname, optarg, fwd, addr, ifname, 1, NUM_PORTS - 1, exclude, - 1, true); + 1, FWD_WEAK); return; } @@ -380,7 +392,7 @@ static void conf_ports(const struct ctx *c, char optname, const char *optarg, addr, ifname, orig_range.first, orig_range.last, exclude, - mapped_range.first, false); + mapped_range.first, 0); } while ((p = next_chunk(p, ','))); return; @@ -1210,6 +1222,17 @@ dns6: info(" %s", c->dns_search[i].n); } } + + info("Inbound TCP forwarding:"); + fwd_table_print(&c->tcp.fwd_in); + info("Inbound UDP forwarding:"); + fwd_table_print(&c->udp.fwd_in); + if (c->mode == MODE_PASTA) { + info("Outbound TCP forwarding:"); + fwd_table_print(&c->tcp.fwd_out); + info("Outbound UDP forwarding:"); + fwd_table_print(&c->udp.fwd_out); + } } /** diff --git a/fwd.c b/fwd.c index 44a0e109..a8477607 100644 --- a/fwd.c +++ b/fwd.c @@ -13,6 +13,7 @@ * Author: David Gibson <david(a)gibson.dropbear.id.au> */ +#include <assert.h> #include <stdint.h> #include <errno.h> #include <fcntl.h> @@ -22,6 +23,8 @@ #include "util.h" #include "ip.h" +#include "siphash.h" +#include "inany.h" #include "fwd.h" #include "passt.h" #include "lineread.h" @@ -313,6 +316,79 @@ bool fwd_port_is_ephemeral(in_port_t port) return (port >= fwd_ephemeral_min) && (port <= fwd_ephemeral_max); } +/** + * fwd_table_add() - Add an entry to a forwarding table + * @fwd: Table to add to + * @flags: Flags for this entry + * @addr: Our address to forward (NULL for both 0.0.0.0 and ::) + * @ifname: Only forward from this interface name, if non-empty + * @first: First port number to forward + * @last: Last port number to forward + * @to: First port of target port range to map to + */ +void fwd_table_add(struct fwd_ports *fwd, uint8_t flags, + const union inany_addr *addr, const char *ifname, + in_port_t first, in_port_t last, in_port_t to) +{ + /* Flags which can be set from the caller */ + const uint8_t allowed_flags = FWD_WEAK; + struct fwd_entry *new; + + ASSERT(!(flags & ~allowed_flags)); + + if (fwd->count >= ARRAY_SIZE(fwd->tab)) + die("Too many port forwarding ranges"); + + new = &fwd->tab[fwd->count++]; + new->flags = flags; + + if (addr) { + new->addr = *addr; + } else { + new->addr = inany_any6; + new->flags |= FWD_DUAL_STACK; + } + + memset(new->ifname, 0, sizeof(new->ifname)); + if (ifname) + strncpy(new->ifname, ifname, sizeof(new->ifname)); + + ASSERT(first <= last); + new->first = first; + new->last = last; + + new->to = to; +} + +/** + * fwd_table_print() - Print forwarding table for debugging + * @fwd: Table to print + */ +void fwd_table_print(const struct fwd_ports *fwd) +{ + unsigned i; + + for (i = 0; i < fwd->count; i++) { + const struct fwd_entry *fe = &fwd->tab[i]; + const char *weak = fe->flags & FWD_WEAK ? " WEAK" : ""; + const char *percent = *fe->ifname ? "%" : ""; + char addr[INANY_ADDRSTRLEN] = "*"; + + if (!(fe->flags & FWD_DUAL_STACK)) + inany_ntop(&fe->addr, addr, sizeof(addr)); + + if (fe->first == fe->last) { + info(" [%s]%s%s:%hu => %hu %s", + addr, percent, fe->ifname, + fe->first, fe->to, weak); + } else { + info(" [%s]%s%s:%hu-%hu => %hu-%hu %s", + addr, percent, fe->ifname, fe->first, fe->last, + fe->to, fe->last - fe->first + fe->to, weak); + } + } +} + /* See enum in kernel's include/net/tcp_states.h */ #define UDP_LISTEN 0x07 #define TCP_LISTEN 0x0a diff --git a/fwd.h b/fwd.h index 77925822..21f00cf8 100644 --- a/fwd.h +++ b/fwd.h @@ -16,6 +16,30 @@ struct flowside; void fwd_probe_ephemeral(void); bool fwd_port_is_ephemeral(in_port_t port); +/** + * struct fwd_entry - One range of ports to forward + * @addr: Address to forward from + * @ifname: Interface to forward from + * @first: First port number to forward + * @last: Last port number to forward + * @to: Port number to forward port @first to. + * @flags: Flag mask + * FWD_DUAL_STACK - forward both IPv4 and IPv6 (requires @addr be ::) + * FWD_WEAK - Don't give an error if binds fail for some forwards + * + * FIXME: @addr and @ifname currently ignored for outbound tables + */ +struct fwd_entry { + union inany_addr addr; + char ifname[IFNAMSIZ]; + in_port_t first, last, to; +#define FWD_DUAL_STACK BIT(0) +#define FWD_WEAK BIT(1) + uint8_t flags; +}; + +#define MAX_FWDS 128 + enum fwd_ports_mode { FWD_UNSET = 0, FWD_SPEC = 1, @@ -38,14 +62,21 @@ struct fwd_ports { enum fwd_ports_mode mode; int scan4; int scan6; + unsigned count; + struct fwd_entry tab[MAX_FWDS]; uint8_t map[PORT_BITMAP_SIZE]; in_port_t delta[NUM_PORTS]; }; #define FWD_PORT_SCAN_INTERVAL 1000 /* ms */ +void fwd_table_add(struct fwd_ports *fwd, uint8_t flags, + const union inany_addr *addr, const char *ifname, + in_port_t first, in_port_t last, in_port_t to); +void fwd_table_print(const struct fwd_ports *fwd); + void fwd_scan_ports_init(struct ctx *c); -void fwd_scan_ports_timer(struct ctx *c, const struct timespec *now); +void fwd_scan_ports_timer(struct ctx * c, const struct timespec *now); bool nat_inbound(const struct ctx *c, const union inany_addr *addr, union inany_addr *translated); -- 2.52.0

1 0

[RFC 00/12] Support for multiple address and late binding
by Jon Maloy 18 Dec '25

18 Dec '25

This series add functionality corresponding to three user stories in https://pad.passt.top/p/NetlinkMonitor: US-1: Dynamic Network Configuration Updates (PASTA) US-3: US-3: Multiple IPv6 Addresses (PASTA) US-4: Multiple IPv4 Addresses (PASTA) Jon Maloy (12): ip: Introduce multi-address data structures for IPv4 and IPv6 ip: Add ip4_default_prefix_len() helper function for class-based prefix conf: Allow multiple -a/--address options per address family conf: Apply -n/--netmask to most recently added address fwd: Check all configured addresses in guest accessibility functions arp: Check all configured addresses in ARP filtering netlink: Subscribe to link/address changes in namespace netlink: Subscribe to route changes in namespace netlink: Add host-side monitoring for late template interface binding netlink: Add host-side route monitoring and propagation netlink: Prevent host route events from overwriting guest-configured gateway netlink: Rename tap interface when late binding discovers template name arp.c | 11 +- conf.c | 135 +++++--- dhcp.c | 8 +- dhcpv6.c | 6 +- epoll_type.h | 4 + fwd.c | 30 +- ip.c | 21 ++ ip.h | 28 ++ isolation.c | 4 + ndp.c | 6 +- netlink.c | 869 +++++++++++++++++++++++++++++++++++++++++++++++++++ netlink.h | 6 + passt.c | 9 + passt.h | 21 +- pasta.c | 28 +- tap.c | 37 ++- tap.h | 1 + util.h | 1 + 18 files changed, 1137 insertions(+), 88 deletions(-) -- 2.51.1

2 31

[PATCH v2] conf: Support CIDR notation for -a/--address option
by Jon Maloy 18 Dec '25

18 Dec '25

Extend the -a/--address option to accept addresses in CIDR notation (e.g., 192.168.1.1/24 or 2001:db8::1/64) as an alternative to using separate -a and -n options. Add conf_addr_prefix() helper function that: - Parses address strings with optional /prefix suffix - Validates prefix length based on address family (0-32 for IPv4, 0-128 for IPv6) - Returns address family and fills address/prefix output parameters For IPv4, the prefix is stored in ip4.prefix_len when provided. Multiple CIDR addresses use last-wins semantics for the prefix, consistent with how addresses are handled currently. However, mixing -n and CIDR notation results in an error to catch likely user mistakes. Also fix a bug in conf_ip4_prefix() that was incorrectly using the global 'optarg' instead of its 'arg' parameter. Signed-off-by: Jon Maloy <jmaloy(a)redhat.com> --- v2: Fixed incorrect error printout, as noted by Laurent Vivier. We now keep the old semantics, i.e., allowing multiple -a options for each protocol. This semantics looks wrong, but will anyway be fixed in my upcoming series. Signed-off-by: Jon Maloy <jmaloy(a)redhat.com> --- conf.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 84 insertions(+), 15 deletions(-) diff --git a/conf.c b/conf.c index 2942c8c..764b910 100644 --- a/conf.c +++ b/conf.c @@ -682,7 +682,7 @@ static int conf_ip4_prefix(const char *arg) return -1; } else { errno = 0; - len = strtoul(optarg, NULL, 0); + len = strtoul(arg, NULL, 0); if (len > 32 || errno) return -1; } @@ -690,6 +690,56 @@ static int conf_ip4_prefix(const char *arg) return len; } +/** + * conf_addr_prefix() - Parse address with optional /prefix notation + * @arg: Address string, optionally with /prefix + * @addr4: Output for IPv4 address + * @addr6: Output for IPv6 address + * @prefix: Output for prefix length (0 if not specified) + * + * Return: AF_INET for IPv4, AF_INET6 for IPv6, -1 on error + */ +static int conf_addr_prefix(const char *arg, struct in_addr *addr4, + struct in6_addr *addr6, int *prefix) +{ + char buf[INET6_ADDRSTRLEN + sizeof("/128")]; + char *slash; + + *prefix = 0; + + if (snprintf(buf, sizeof(buf), "%s", arg) >= (int)sizeof(buf)) + return -1; + + /* Check for /prefix suffix */ + slash = strchr(buf, '/'); + if (slash) { + unsigned long len; + char *end; + + *slash = '\0'; + errno = 0; + len = strtoul(slash + 1, &end, 10); + if (errno || *end) + return -1; + + *prefix = len; + } + + if (inet_pton(AF_INET6, buf, addr6) == 1) { + if (*prefix > 128) + return -1; + return AF_INET6; + } + + if (inet_pton(AF_INET, buf, addr4) == 1) { + if (*prefix > 32) + return -1; + return AF_INET; + } + + return -1; +} + /** * conf_ip4() - Verify or detect IPv4 support, get relevant addresses * @ifi: Host interface to attempt (0 to determine one) @@ -896,7 +946,7 @@ static void usage(const char *name, FILE *f, int status) " a zero value disables assignment\n" " default: 65520: maximum 802.3 MTU minus 802.3 header\n" " length, rounded to 32 bits (IPv4 words)\n" - " -a, --address ADDR Assign IPv4 or IPv6 address ADDR\n" + " -a, --address ADDR Assign IPv4 or IPv6 address ADDR[/PREFIX]\n" " can be specified zero to two times (for IPv4 and IPv6)\n" " default: use addresses from interface with default route\n" " -n, --netmask MASK Assign IPv4 MASK, dot-decimal or bits\n" @@ -1499,6 +1549,7 @@ void conf(struct ctx *c, int argc, char **argv) const char *logname = (c->mode == MODE_PASTA) ? "pasta" : "passt"; char userns[PATH_MAX] = { 0 }, netns[PATH_MAX] = { 0 }; bool copy_addrs_opt = false, copy_routes_opt = false; + bool prefix_from_cidr = false, prefix_from_opt = false; enum fwd_ports_mode fwd_default = FWD_NONE; bool v4_only = false, v6_only = false; unsigned dns4_idx = 0, dns6_idx = 0; @@ -1808,23 +1859,38 @@ void conf(struct ctx *c, int argc, char **argv) c->mtu = mtu; break; } - case 'a': - if (inet_pton(AF_INET6, optarg, &c->ip6.addr) && - !IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr) && - !IN6_IS_ADDR_LOOPBACK(&c->ip6.addr) && - !IN6_IS_ADDR_V4MAPPED(&c->ip6.addr) && - !IN6_IS_ADDR_V4COMPAT(&c->ip6.addr) && - !IN6_IS_ADDR_MULTICAST(&c->ip6.addr)) { + case 'a': { + struct in6_addr addr6; + struct in_addr addr4; + int prefix = 0; + int af; + + af = conf_addr_prefix(optarg, &addr4, &addr6, &prefix); + + if (af == AF_INET6 && + !IN6_IS_ADDR_UNSPECIFIED(&addr6) && + !IN6_IS_ADDR_LOOPBACK(&addr6) && + !IN6_IS_ADDR_V4MAPPED(&addr6) && + !IN6_IS_ADDR_V4COMPAT(&addr6) && + !IN6_IS_ADDR_MULTICAST(&addr6)) { + c->ip6.addr = addr6; if (c->mode == MODE_PASTA) c->ip6.no_copy_addrs = true; break; } - if (inet_pton(AF_INET, optarg, &c->ip4.addr) && - !IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr) && - !IN4_IS_ADDR_BROADCAST(&c->ip4.addr) && - !IN4_IS_ADDR_LOOPBACK(&c->ip4.addr) && - !IN4_IS_ADDR_MULTICAST(&c->ip4.addr)) { + if (af == AF_INET && + !IN4_IS_ADDR_UNSPECIFIED(&addr4) && + !IN4_IS_ADDR_BROADCAST(&addr4) && + !IN4_IS_ADDR_LOOPBACK(&addr4) && + !IN4_IS_ADDR_MULTICAST(&addr4)) { + c->ip4.addr = addr4; + if (prefix) { + if (prefix_from_opt) + die("Can't use both -n and CIDR prefix"); + c->ip4.prefix_len = prefix; + prefix_from_cidr = true; + } if (c->mode == MODE_PASTA) c->ip4.no_copy_addrs = true; break; @@ -1832,11 +1898,14 @@ void conf(struct ctx *c, int argc, char **argv) die("Invalid address: %s", optarg); break; + } case 'n': + if (prefix_from_cidr) + die("Can't use both -n and CIDR prefix"); c->ip4.prefix_len = conf_ip4_prefix(optarg); if (c->ip4.prefix_len < 0) die("Invalid netmask: %s", optarg); - + prefix_from_opt = true; break; case 'M': parse_mac(c->our_tap_mac, optarg); -- 2.52.0

3 2

[PATCH] conf: Support CIDR notation for -a/--address option
by Jon Maloy 17 Dec '25

17 Dec '25

We extend the -a/--address option to accept addresses in CIDR notation (e.g., 192.168.1.1/24 or 2001:db8::1/64) as an alternative to using separate -a and -n options. For IPv4, the prefix is stored in ip4.prefix_len when provided. The CIDR prefix and -n/--netmask options are mutually exclusive - using both results in an error. Also fix a bug in conf_ip4_prefix() that was incorrectly using the global 'optarg' instead of its 'arg' parameter. Signed-off-by: Jon Maloy <jmaloy(a)redhat.com> --- conf.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 84 insertions(+), 15 deletions(-) diff --git a/conf.c b/conf.c index 2942c8c..0f66c77 100644 --- a/conf.c +++ b/conf.c @@ -682,7 +682,7 @@ static int conf_ip4_prefix(const char *arg) return -1; } else { errno = 0; - len = strtoul(optarg, NULL, 0); + len = strtoul(arg, NULL, 0); if (len > 32 || errno) return -1; } @@ -690,6 +690,56 @@ static int conf_ip4_prefix(const char *arg) return len; } +/** + * conf_addr_prefix() - Parse address with optional /prefix notation + * @arg: Address string, optionally with /prefix + * @addr4: Output for IPv4 address + * @addr6: Output for IPv6 address + * @prefix: Output for prefix length (0 if not specified) + * + * Return: AF_INET for IPv4, AF_INET6 for IPv6, -1 on error + */ +static int conf_addr_prefix(const char *arg, struct in_addr *addr4, + struct in6_addr *addr6, int *prefix) +{ + char buf[INET6_ADDRSTRLEN + sizeof("/128")]; + char *slash; + + *prefix = 0; + + if (snprintf(buf, sizeof(buf), "%s", arg) >= (int)sizeof(buf)) + return -1; + + /* Check for /prefix suffix */ + slash = strchr(buf, '/'); + if (slash) { + unsigned long len; + char *end; + + *slash = '\0'; + errno = 0; + len = strtoul(slash + 1, &end, 10); + if (errno || *end) + return -1; + + *prefix = len; + } + + if (inet_pton(AF_INET6, buf, addr6) == 1) { + if (*prefix > 128) + return -1; + return AF_INET6; + } + + if (inet_pton(AF_INET, buf, addr4) == 1) { + if (*prefix > 32) + return -1; + return AF_INET; + } + + return -1; +} + /** * conf_ip4() - Verify or detect IPv4 support, get relevant addresses * @ifi: Host interface to attempt (0 to determine one) @@ -896,7 +946,7 @@ static void usage(const char *name, FILE *f, int status) " a zero value disables assignment\n" " default: 65520: maximum 802.3 MTU minus 802.3 header\n" " length, rounded to 32 bits (IPv4 words)\n" - " -a, --address ADDR Assign IPv4 or IPv6 address ADDR\n" + " -a, --address ADDR Assign IPv4 or IPv6 address ADDR[/PREFIX]\n" " can be specified zero to two times (for IPv4 and IPv6)\n" " default: use addresses from interface with default route\n" " -n, --netmask MASK Assign IPv4 MASK, dot-decimal or bits\n" @@ -1501,6 +1551,7 @@ void conf(struct ctx *c, int argc, char **argv) bool copy_addrs_opt = false, copy_routes_opt = false; enum fwd_ports_mode fwd_default = FWD_NONE; bool v4_only = false, v6_only = false; + bool prefix_explicit = false; unsigned dns4_idx = 0, dns6_idx = 0; unsigned long max_mtu = IP_MAX_MTU; struct fqdn *dnss = c->dns_search; @@ -1808,23 +1859,38 @@ void conf(struct ctx *c, int argc, char **argv) c->mtu = mtu; break; } - case 'a': - if (inet_pton(AF_INET6, optarg, &c->ip6.addr) && - !IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr) && - !IN6_IS_ADDR_LOOPBACK(&c->ip6.addr) && - !IN6_IS_ADDR_V4MAPPED(&c->ip6.addr) && - !IN6_IS_ADDR_V4COMPAT(&c->ip6.addr) && - !IN6_IS_ADDR_MULTICAST(&c->ip6.addr)) { + case 'a': { + struct in6_addr addr6; + struct in_addr addr4; + int prefix = 0; + int af; + + af = conf_addr_prefix(optarg, &addr4, &addr6, &prefix); + + if (af == AF_INET6 && + !IN6_IS_ADDR_UNSPECIFIED(&addr6) && + !IN6_IS_ADDR_LOOPBACK(&addr6) && + !IN6_IS_ADDR_V4MAPPED(&addr6) && + !IN6_IS_ADDR_V4COMPAT(&addr6) && + !IN6_IS_ADDR_MULTICAST(&addr6)) { + c->ip6.addr = addr6; if (c->mode == MODE_PASTA) c->ip6.no_copy_addrs = true; break; } - if (inet_pton(AF_INET, optarg, &c->ip4.addr) && - !IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr) && - !IN4_IS_ADDR_BROADCAST(&c->ip4.addr) && - !IN4_IS_ADDR_LOOPBACK(&c->ip4.addr) && - !IN4_IS_ADDR_MULTICAST(&c->ip4.addr)) { + if (af == AF_INET && + !IN4_IS_ADDR_UNSPECIFIED(&addr4) && + !IN4_IS_ADDR_BROADCAST(&addr4) && + !IN4_IS_ADDR_LOOPBACK(&addr4) && + !IN4_IS_ADDR_MULTICAST(&addr4)) { + c->ip4.addr = addr4; + if (prefix) { + if (prefix_explicit) + die("Can't use both -n and CIDR prefix"); + c->ip4.prefix_len = prefix; + prefix_explicit = true; + } if (c->mode == MODE_PASTA) c->ip4.no_copy_addrs = true; break; @@ -1832,11 +1898,14 @@ void conf(struct ctx *c, int argc, char **argv) die("Invalid address: %s", optarg); break; + } case 'n': + if (prefix_explicit) + die("Can't use both -n and CIDR prefix"); c->ip4.prefix_len = conf_ip4_prefix(optarg); if (c->ip4.prefix_len < 0) die("Invalid netmask: %s", optarg); - + prefix_explicit = true; break; case 'M': parse_mac(c->our_tap_mac, optarg); -- 2.52.0

2 1

passt: new version 2025_12_15.b40f5cd available
by Stefano Brivio 15 Dec '25

15 Dec '25

The new version with tag 2025_12_15.b40f5cd includes the following changes: b40f5cd tcp: Use less-than-MSS window on no queued data, or no data sent recently 35fa86a conf, fwd: Move initialisation of auto port scanning out of conf() 5be1a22 tcp: Remove extra space from TCP_INFO debug messages (trivial) 87f1a91 pasta: Clean up waiting pasta child on failures e6612fe treewide: Introduce passt_exit() helper d6c5b6e tcp: Suppress new instance of cppcheck bug 14191 https://passt.top/passt/log/?qt=range&q=2025_12_10.d04c480..2025_12_15.b40f… Packages: - Alpine Linux: https://pkgs.alpinelinux.org/packages?name=passt - Arch Linux: https://www.archlinux.org/packages/extra/x86_64/passt/ https://archlinuxarm.org/packages/aarch64/passt https://archlinuxarm.org/packages/armv7h/passt - Chimera: https://pkgs.chimera-linux.org/packages?name=passt - Clear Linux: https://github.com/clearlinux-pkgs/passt/ - Copr (CentOS Stream, EPEL, Fedora, Mageia): https://copr.fedorainfracloud.org/coprs/sbrivio/passt/build/9911424/ permanent mirror: https://passt.top/builds/copr/0^20251215.gb40f5cd/ - Debian tracker: https://tracker.debian.org/pkg/passt - Fedora updates: https://bodhi.fedoraproject.org/updates/?packages=passt - Gentoo versions: https://packages.gentoo.org/packages/net-misc/passt - GNU Guix: https://packages.guix.gnu.org/packages/passt/ - Homebrew: https://formulae.brew.sh/formula/passt - NixOS: https://github.com/NixOS/nixpkgs/tree/nixos-unstable/pkgs/by-name/pa/passt - openSUSE: https://software.opensuse.org/package/passt - OpenMandriva: https://github.com/OpenMandrivaAssociation/passt/tree/master - PLD Linux: https://git.pld-linux.org/cgi-bin/gitweb.cgi?p=packages/passt.git - Solus: https://github.com/getsolus/packages/tree/main/packages/p/passt - Ubuntu tracker: https://launchpad.net/ubuntu/+source/passt - Void Linux: https://voidlinux.org/packages/?q=passt - Static builds: - Package for other RPM-based distributions, x86_64 only: https://passt.top/builds/latest/x86_64/passt-gb40f5cd-1.x86_64.rpm - x86_64 static binaries: https://passt.top/builds/latest/x86_64/ - Debian package, from x86_64 static build: https://passt.top/builds/latest/x86_64/passt_0b40f5cd-1_all.deb -- Stefano

1 0

[PATCH v4 0/6] vhost-user: Add multiqueue support
by Laurent Vivier 15 Dec '25

15 Dec '25

This series implements multiqueue support for vhost-user mode, allowing passt to utilize multiple queue pairs for improved network throughput when used with multi-CPU guest VMs. While this version uses a single thread for packet processing, it enables the guest kernel to distribute network traffic across multiple queues and vCPUs. The implementation advertises support for up to 16 queue pairs (32 virtqueues) by setting VIRTIO_NET_F_MQ and VHOST_USER_PROTOCOL_F_MQ feature flags. Packets are routed to the appropriate RX queue based on which TX queue they originated from, following the virtio specification's automatic receive steering requirements. This series adds: - Multiqueue capability advertisement (VIRTIO_NET_F_MQ and VHOST_USER_PROTOCOL_F_MQ features) - Per-queue-pair packet pools to support concurrent queue operations - Queue pair parameter throughout the network stack, propagated through all protocol handlers (TCP, UDP, ICMP, ARP, DHCP, DHCPv6, NDP) - Flow-aware queue routing that tracks the originating TX queue for each flow and routes return packets to the corresponding RX queue - Test coverage with VHOST_USER_MQ environment variable to validate multiqueue functionality across all protocols (TCP, UDP, ICMP) and services (DHCP, NDP) Current behavior: - TX queue selection is controlled by the guest kernel's networking stack - RX packets are routed to queues based on their associated flows, with the queue assignment updated on each packet from TX to maintain affinity - Host-initiated flows (e.g., from socket-side connections) currently default to queue pair 0 The changes are transparent to single-queue operation - passt/pasta modes and single-queue vhost-user configurations continue to work unchanged, always using queue pair 0. v4: - Rebase - Added QPAIR_DEFAULT, QPAIR_FROMGUEST_QUEUE(), QPAIR_TOGUEST_QUEUE(), and QPAIR_FROM_QUEUE() macros to centralize queue pair calculations - Replaced hardcoded 0 with QPAIR_DEFAULT throughout for clarity - Set queue pair at flow creation time in icmp_ping_new() and udp_flow_new() rather than after creation - Removed vhost-user-specific queue macros (VHOST_USER_TX_QUEUE, VHOST_USER_IS_QUEUE_TX, VHOST_USER_IS_QUEUE_RX) in favor of generic QPAIR_* macros for better consistency v3: - Removed --max-qpairs configuration option - multiqueue support is now always enabled up to 16 queue pairs without requiring explicit configuration - Replaced "tap: Add queue pair parameter throughout the packet processing path" with "tap: Convert packet pools to per-queue-pair arrays for multiqueue" - simplified implementation by converting global pools to arrays rather than passing pool parameters throughout - Changed qpair parameter type from int to unsigned int throughout the codebase - Simplified test infrastructure - queues parameter is always set on netdev, mq=true added to virtio-net only when VHOST_USER_MQ > 1 - Updated QEMU usage hints to always show multiqueue-capable command line v2: - New patch: "tap: Remove pool parameter from tap4_handler() and tap6_handler()" to clean up unused parameters before adding queue pair parameter - Changed to one packet pool per queue pair instead of shared pools across all queue pairs - Split "multiqueue: Add queue-aware flow management..." into two patches: - "tap: Add queue pair parameter throughout the packet processing path" - "flow: Add queue pair tracking to flow management" - Updated test infrastructure patch with refined implementation Laurent Vivier (6): tap: Remove pool parameter from tap4_handler() and tap6_handler() vhost-user: Enable multiqueue test: Add multiqueue support to vhost-user test infrastructure vhost-user: Add queue pair parameter throughout the network stack tap: Convert packet pools to per-queue-pair arrays for multiqueue flow: Add queue pair tracking to flow management arp.c | 15 +++-- arp.h | 6 +- dhcp.c | 5 +- dhcp.h | 2 +- dhcpv6.c | 12 ++-- dhcpv6.h | 2 +- flow.c | 33 +++++++++ flow.h | 17 +++++ fwd.c | 18 ++--- fwd.h | 5 +- icmp.c | 33 +++++---- icmp.h | 4 +- ndp.c | 35 ++++++---- ndp.h | 7 +- netlink.c | 2 +- passt.c | 2 +- passt.h | 8 +++ tap.c | 180 ++++++++++++++++++++++++++++--------------------- tap.h | 22 +++--- tcp.c | 47 +++++++------ tcp.h | 7 +- tcp_vu.c | 8 ++- test/lib/setup | 21 +++--- test/run | 23 +++++++ udp.c | 47 +++++++------ udp.h | 6 +- udp_flow.c | 15 +++-- udp_flow.h | 2 +- udp_internal.h | 4 +- udp_vu.c | 4 +- vhost_user.c | 14 ++-- vhost_user.h | 6 -- virtio.h | 2 +- vu_common.c | 24 ++++--- vu_common.h | 3 +- 35 files changed, 403 insertions(+), 238 deletions(-) -- 2.51.1

1 6

[PATCH] udp: Rename udp_buf_sock_to_tap() and udp_vu_sock_to_tap()
by Laurent Vivier 15 Dec '25

15 Dec '25

The function udp_vu_sock_to_tap() sends data to the vhost-user interface, not the tap interface. Rename it to udp_sock_to_vu() to accurately reflect its destination. The function udp_buf_sock_to_tap() includes a "buf_" prefix that is now redundant. Since the functions can be distinguished by their destination (to_tap vs. to_vu), drop the prefix and rename it to udp_sock_to_tap(). No functional change. Signed-off-by: Laurent Vivier <lvivier(a)redhat.com> --- udp.c | 15 +++++++-------- udp_vu.c | 4 ++-- udp_vu.h | 2 +- 3 files changed, 10 insertions(+), 11 deletions(-) diff --git a/udp.c b/udp.c index 08bec50a27af..10704681973b 100644 --- a/udp.c +++ b/udp.c @@ -824,14 +824,14 @@ static void udp_sock_to_sock(const struct ctx *c, int from_s, int n, } /** - * udp_buf_sock_to_tap() - Forward datagrams from socket to tap + * udp_sock_to_tap() - Forward datagrams from socket to tap * @c: Execution context * @s: Socket to read data from * @n: Maximum number of datagrams to forward * @tosidx: Flow & side to forward data from @s to */ -static void udp_buf_sock_to_tap(const struct ctx *c, int s, int n, - flow_sidx_t tosidx) +static void udp_sock_to_tap(const struct ctx *c, int s, int n, + flow_sidx_t tosidx) { const struct flowside *toside = flowside_at_sidx(tosidx); struct udp_flow *uflow = udp_at_sidx(tosidx); @@ -892,9 +892,9 @@ void udp_sock_fwd(const struct ctx *c, int s, uint8_t frompif, udp_sock_to_sock(c, s, 1, tosidx); } else if (topif == PIF_TAP) { if (c->mode == MODE_VU) - udp_vu_sock_to_tap(c, s, 1, tosidx); + udp_sock_to_vu(c, s, 1, tosidx); else - udp_buf_sock_to_tap(c, s, 1, tosidx); + udp_sock_to_tap(c, s, 1, tosidx); } else if (flow_sidx_valid(tosidx)) { struct udp_flow *uflow = udp_at_sidx(tosidx); @@ -972,10 +972,9 @@ void udp_sock_handler(const struct ctx *c, union epoll_ref ref, udp_sock_to_sock(c, ref.fd, n, tosidx); } else if (topif == PIF_TAP) { if (c->mode == MODE_VU) { - udp_vu_sock_to_tap(c, s, UDP_MAX_FRAMES, - tosidx); + udp_sock_to_vu(c, s, UDP_MAX_FRAMES, tosidx); } else { - udp_buf_sock_to_tap(c, s, n, tosidx); + udp_sock_to_tap(c, s, n, tosidx); } } else { flow_err(uflow, diff --git a/udp_vu.c b/udp_vu.c index c30dcf97698f..f7ed6bc6a67c 100644 --- a/udp_vu.c +++ b/udp_vu.c @@ -197,13 +197,13 @@ static void udp_vu_csum(const struct flowside *toside, int iov_used) } /** - * udp_vu_sock_to_tap() - Forward datagrams from socket to tap + * udp_sock_to_vu() - Forward datagrams from socket to vhost-user * @c: Execution context * @s: Socket to read data from * @n: Maximum number of datagrams to forward * @tosidx: Flow & side to forward data from @s to */ -void udp_vu_sock_to_tap(const struct ctx *c, int s, int n, flow_sidx_t tosidx) +void udp_sock_to_vu(const struct ctx *c, int s, int n, flow_sidx_t tosidx) { const struct flowside *toside = flowside_at_sidx(tosidx); bool v6 = !(inany_v4(&toside->eaddr) && inany_v4(&toside->oaddr)); diff --git a/udp_vu.h b/udp_vu.h index 576b0e716f3d..669bde1c10dc 100644 --- a/udp_vu.h +++ b/udp_vu.h @@ -8,6 +8,6 @@ void udp_vu_listen_sock_data(const struct ctx *c, union epoll_ref ref, const struct timespec *now); -void udp_vu_sock_to_tap(const struct ctx *c, int s, int n, flow_sidx_t tosidx); +void udp_sock_to_vu(const struct ctx *c, int s, int n, flow_sidx_t tosidx); #endif /* UDP_VU_H */ -- 2.51.1

3 3

[PATCH v2 0/9] tcp: Fix throughput issues with non-local peers
by Stefano Brivio 15 Dec '25

15 Dec '25

Patch 2/9 is the most relevant fix here, as we currently advertise a window that might be too big for what we can write to the socket, causing retransmissions right away and occasional high latency on short transfers to non-local peers. Mostly as a consequence of fixing that, we now need several improvements and small fixes, including, most notably, an adaptive approach to pick the interval between checks for socket-side ACKs (patch 3/9), and several tricks to reliably trigger TCP buffer size auto-tuning as implemented by the Linux kernel (patches 5/9 and 7/9). These changes make some existing issues more relevant, fixed by the other patches. With this series, I'm getting the expected (wirespeed) throughput for transfers between peers with varying non-local RTTs: I checked different guests bridged on the same machine (~500 us) and hosts with increasing distance using iperf3, as well as HTTP transfers only for some hosts I have control over (500 us and 5 ms case). With increasing RTTs, I can finally see the throughput converging to the available bandwidth reasonably fast: * 500 us RTT, ~10 Gbps available: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 785 MBytes 6.57 Gbits/sec 13 1.84 MBytes [ 5] 1.00-2.00 sec 790 MBytes 6.64 Gbits/sec 0 1.92 MBytes * 5 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 4.88 MBytes 40.9 Mbits/sec 22 240 KBytes [ 5] 1.00-2.00 sec 46.2 MBytes 388 Mbits/sec 34 900 KBytes [ 5] 2.00-3.00 sec 110 MBytes 923 Mbits/sec 0 1.11 MBytes * 10 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 67.9 MBytes 569 Mbits/sec 2 960 KBytes [ 5] 1.00-2.00 sec 110 MBytes 926 Mbits/sec 0 1.05 MBytes [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec 0 1.17 MBytes * 24 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 2.50 MBytes 20.9 Mbits/sec 16 240 KBytes [ 5] 1.00-2.00 sec 1.50 MBytes 12.6 Mbits/sec 9 120 KBytes [ 5] 2.00-3.00 sec 99.2 MBytes 832 Mbits/sec 4 2.40 MBytes [ 5] 3.00-4.00 sec 122 MBytes 1.03 Gbits/sec 1 3.16 MBytes [ 5] 4.00-5.00 sec 119 MBytes 1.00 Gbits/sec 0 4.16 MBytes * 40 ms, ~600 Mbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 2.12 MBytes 17.8 Mbits/sec 0 600 KBytes [ 5] 1.00-2.00 sec 3.25 MBytes 27.3 Mbits/sec 14 420 KBytes [ 5] 2.00-3.00 sec 31.5 MBytes 264 Mbits/sec 11 1.29 MBytes [ 5] 3.00-4.00 sec 72.5 MBytes 608 Mbits/sec 0 1.46 MBytes * 100 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 4.88 MBytes 40.9 Mbits/sec 1 840 KBytes [ 5] 1.00-2.00 sec 1.62 MBytes 13.6 Mbits/sec 9 240 KBytes [ 5] 2.00-3.00 sec 5.25 MBytes 44.0 Mbits/sec 5 780 KBytes [ 5] 3.00-4.00 sec 9.75 MBytes 81.8 Mbits/sec 0 1.29 MBytes [ 5] 4.00-5.00 sec 15.8 MBytes 132 Mbits/sec 0 1.99 MBytes [ 5] 5.00-6.00 sec 22.9 MBytes 192 Mbits/sec 0 3.05 MBytes [ 5] 6.00-7.00 sec 132 MBytes 1.11 Gbits/sec 0 7.62 MBytes * 114 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.62 MBytes 13.6 Mbits/sec 8 420 KBytes [ 5] 1.00-2.00 sec 2.12 MBytes 17.8 Mbits/sec 15 120 KBytes [ 5] 2.00-3.00 sec 26.0 MBytes 218 Mbits/sec 50 1.82 MBytes [ 5] 3.00-4.00 sec 103 MBytes 865 Mbits/sec 31 5.10 MBytes [ 5] 4.00-5.00 sec 111 MBytes 930 Mbits/sec 0 5.92 MBytes * 153 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 2 180 KBytes [ 5] 1.00-2.00 sec 2.12 MBytes 17.8 Mbits/sec 11 180 KBytes [ 5] 2.00-3.00 sec 12.6 MBytes 106 Mbits/sec 40 1.29 MBytes [ 5] 3.00-4.00 sec 44.5 MBytes 373 Mbits/sec 22 2.75 MBytes [ 5] 4.00-5.00 sec 86.0 MBytes 721 Mbits/sec 0 6.68 MBytes [ 5] 5.00-6.00 sec 120 MBytes 1.01 Gbits/sec 119 6.97 MBytes [ 5] 6.00-7.00 sec 110 MBytes 927 Mbits/sec 0 6.97 MBytes * 186 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 3 180 KBytes [ 5] 1.00-2.00 sec 512 KBytes 4.19 Mbits/sec 4 120 KBytes [ 5] 2.00-3.00 sec 2.12 MBytes 17.8 Mbits/sec 6 360 KBytes [ 5] 3.00-4.00 sec 27.1 MBytes 228 Mbits/sec 6 1.11 MBytes [ 5] 4.00-5.00 sec 38.2 MBytes 321 Mbits/sec 0 1.99 MBytes [ 5] 5.00-6.00 sec 38.2 MBytes 321 Mbits/sec 0 2.46 MBytes [ 5] 6.00-7.00 sec 69.2 MBytes 581 Mbits/sec 71 3.63 MBytes [ 5] 7.00-8.00 sec 110 MBytes 919 Mbits/sec 0 5.92 MBytes * 271 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 0 320 KBytes [ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 600 KBytes [ 5] 2.00-3.00 sec 512 KBytes 4.19 Mbits/sec 7 420 KBytes [ 5] 3.00-4.00 sec 896 KBytes 7.34 Mbits/sec 8 60.0 KBytes [ 5] 4.00-5.00 sec 2.62 MBytes 22.0 Mbits/sec 13 420 KBytes [ 5] 5.00-6.00 sec 12.1 MBytes 102 Mbits/sec 7 1020 KBytes [ 5] 6.00-7.00 sec 19.9 MBytes 167 Mbits/sec 0 1.82 MBytes [ 5] 7.00-8.00 sec 17.9 MBytes 150 Mbits/sec 44 1.76 MBytes [ 5] 8.00-9.00 sec 57.4 MBytes 481 Mbits/sec 30 2.70 MBytes [ 5] 9.00-10.00 sec 88.0 MBytes 738 Mbits/sec 0 6.45 MBytes * 292 ms, ~ 600 Mbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 0 450 KBytes [ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 3 180 KBytes [ 5] 2.00-3.00 sec 640 KBytes 5.24 Mbits/sec 4 120 KBytes [ 5] 3.00-4.00 sec 384 KBytes 3.15 Mbits/sec 2 120 KBytes [ 5] 4.00-5.00 sec 4.50 MBytes 37.7 Mbits/sec 1 660 KBytes [ 5] 5.00-6.00 sec 13.0 MBytes 109 Mbits/sec 3 960 KBytes [ 5] 6.00-7.00 sec 64.5 MBytes 541 Mbits/sec 0 2.17 MBytes * 327 ms, 1 Gbps: [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 0 600 KBytes [ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 4 240 KBytes [ 5] 2.00-3.00 sec 768 KBytes 6.29 Mbits/sec 4 120 KBytes [ 5] 3.00-4.00 sec 1.62 MBytes 13.6 Mbits/sec 5 120 KBytes [ 5] 4.00-5.00 sec 1.88 MBytes 15.7 Mbits/sec 0 480 KBytes [ 5] 5.00-6.00 sec 17.6 MBytes 148 Mbits/sec 14 1.05 MBytes [ 5] 6.00-7.00 sec 35.1 MBytes 295 Mbits/sec 0 2.58 MBytes [ 5] 7.00-8.00 sec 45.2 MBytes 380 Mbits/sec 0 4.63 MBytes [ 5] 8.00-9.00 sec 27.0 MBytes 226 Mbits/sec 96 3.93 MBytes [ 5] 9.00-10.00 sec 85.9 MBytes 720 Mbits/sec 67 4.22 MBytes [ 5] 10.00-11.00 sec 118 MBytes 986 Mbits/sec 0 9.67 MBytes [ 5] 11.00-12.00 sec 124 MBytes 1.04 Gbits/sec 0 15.9 MBytes For short transfers, we strictly stick to the available sending buffer size to (almost) make sure we avoid local retransmissions, and significantly decrease transfer time as a result: from 1.2 s to 60 ms for a 5 MB HTTP transfer from a container hosted in a virtual machine to another guest. v2: - Add 1/9, factoring out a generic version of the scaling function we already use for tcp_get_sndbuf(), as I'm now using it in 7/9 as well - in 3/9, use 4 bits instead of 3 to represent the RTT, which is important as we now use RTT values for more than just the ACK checks - in 5/9, instead of just comparing the sending buffer to SNDBUF_BIG to decide when to acknowledge data, use an adaptive approach based on the bandwidth-delay product - in 6/9, clarify the relationship between SWS avoidance and Nagle's algorithm, and introduce a reference to RFC 813, Section 4 - in 7/9, use an adaptive approach based on the product of bytes sent (and acknowledged) so far and RTT, instead of the previous approach based on bytes sent only, as it allows us to converge to the expected throughput much quicker with high RTT destinations Stefano Brivio (9): tcp, util: Add function for scaling to linearly interpolated factor, use it tcp: Limit advertised window to available, not total sending buffer size tcp: Adaptive interval based on RTT for socket-side acknowledgement checks tcp: Don't clear ACK_TO_TAP_DUE if we're advertising a zero-sized window tcp: Acknowledge everything if it looks like bulk traffic, not interactive tcp: Don't limit window to less-than-MSS values, use zero instead tcp: Allow exceeding the available sending buffer size in window advertisements tcp: Send a duplicate ACK also on complete sendmsg() failure tcp: Skip redundant ACK on partial sendmsg() failure README.md | 2 +- tcp.c | 168 ++++++++++++++++++++++++++++++++++++++++++----------- tcp_conn.h | 9 +++ util.c | 52 +++++++++++++++++ util.h | 2 + 5 files changed, 197 insertions(+), 36 deletions(-) -- 2.43.0

2 24