June 2024 - dev

[PATCH] netlink: With no default route, pick the first interface with a route
by Stefano Brivio 19 Jun '24

19 Jun '24

While commit f919dc7a4b1c ("conf, netlink: Don't require a default route to start") sounded reasonable in the assumption that, if we don't find default routes for a given address family, we can still proceed by selecting an interface with any route *iff it's the only one for that protocol family*, Jelle reported a further issue in a similar setup. There, multiple interfaces are present, and while remote container connectivity doesn't matter for the container, local connectivity is desired. There are no default routes, but those multiple interfaces all have non-default routes, so we should just pick one and start. Pick the first interface reported by the kernel with any route, if there are no default routes. There should be no harm in doing so. Reported-by: Jelle van der Waa <jvanderwaa(a)redhat.com> Reported-by: Martin Pitt <mpitt(a)redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2277954 Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- netlink.c | 16 ++++++++-------- passt.1 | 4 ++-- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/netlink.c b/netlink.c index 0be4ea3..3aed7e5 100644 --- a/netlink.c +++ b/netlink.c @@ -269,8 +269,7 @@ unsigned int nl_get_ext_if(int s, sa_family_t af) size_t na; /* Look for an interface with a default route first, failing that, look - * for any interface with a route, and pick it only if it's the only - * interface with a route. + * for any interface with a route, and pick the first one, if any. */ seq = nl_send(s, &req, RTM_GETROUTE, NLM_F_DUMP, sizeof(req)); nl_foreach_oftype(nh, status, s, buf, seq, RTM_NEWROUTE) { @@ -324,18 +323,19 @@ unsigned int nl_get_ext_if(int s, sa_family_t af) warn("netlink: RTM_GETROUTE failed: %s", strerror(-status)); if (defifi) { - if (ndef > 1) + if (ndef > 1) { info("Multiple default %s routes, picked first", af_name(af)); + } return defifi; } if (anyifi) { - if (nany == 1) - return anyifi; - - info("Multiple interfaces with %s routes, use -i to select one", - af_name(af)); + if (nany > 1) { + info("Multiple interfaces with %s routes, picked first", + af_name(af)); + } + return anyifi; } if (!nany) diff --git a/passt.1 b/passt.1 index 6dfa670..6ee1e2e 100644 --- a/passt.1 +++ b/passt.1 @@ -152,8 +152,8 @@ This option can be specified zero (for defaults) to two times (once for IPv4, once for IPv6). By default, assigned IPv4 and IPv6 addresses are taken from the host interfaces with the first default route, if any, for the corresponding IP version. If no -default routes are available and there is just one interface with any route, -that interface will be chosen instead. +default routes are available and there is any interface with any route for a +given IP version, the first of these interfaces will be chosen instead. .TP .BR \-n ", " \-\-netmask " " \fImask -- 2.43.0

3 2

[PATCH] netlink: Ignore EHOSTUNREACH failures when duplicating routes
by Stefano Brivio 19 Jun '24

19 Jun '24

To implicitly resolve possible dependencies between routes as we duplicate them into the target namespace, we go through a set of n routes n times, and ignore EEXIST responses to netlink messages (we already inserted the route) and ENETUNREACH (we didn't insert the route yet, but we need to insert another one first). Until now, we didn't ignore EHOSTUNREACH responses. However, NetworkManager users with multiple non-subnet routes for the same interface report that pasta exits with "no route to host" while duplicating routes. This happens because NetworkManager sets the 'noprefixroute' attribute on addresses, meaning that the kernel won't create subnet routes automatically depending on the prefix length of the address. We copy this attribute as we copy the address into the target namespace, and as a result, the kernel doesn't create subnet routes in the target namespace either. This means that the gateway for routes that are inserted later can be unreachable at some points during the sequence of route duplication. That is, we don't just have dependencies between regular routes, but we can also have dependencies between regular routes and subnet routes, as subnet routes are not automatically inserted in advance. Link: https://github.com/containers/podman/issues/22824 Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/netlink.c b/netlink.c index 4dbddb2..0be4ea3 100644 --- a/netlink.c +++ b/netlink.c @@ -655,7 +655,8 @@ int nl_route_dup(int s_src, unsigned int ifi_src, rc = nl_do(s_dst, nh, RTM_NEWROUTE, (flags & ~NLM_F_DUMP_FILTERED) | NLM_F_CREATE, nh->nlmsg_len); - if (rc < 0 && rc != -ENETUNREACH && rc != -EEXIST) + if (rc < 0 && rc != -EEXIST && + rc != -ENETUNREACH && rc != -EHOSTUNREACH) return rc; } } -- 2.43.0

2 1

[PATCH v2] tcp: Don't rely on bind() to fail to decide that connection target is valid
by Stefano Brivio 19 Jun '24

19 Jun '24

Commit e1a2e2780c91 ("tcp: Check if connection is local or low RTT was seen before using large MSS") added a call to bind() before we issue a connect() to the target for an outbound connection. If bind() fails, but neither with EADDRNOTAVAIL, nor with EACCESS, we can conclude that the target address is a local (host) address, and we can use an unlimited MSS. While at it, according to the reasoning of that commit, if bind() succeeds, we would know right away that nobody is listening at that (local) address and port, and we don't even need to call connect(): we can just fail early and reset the connection attempt. But if non-local binds are enabled via net.ipv4.ip_nonlocal_bind or net.ipv6.ip_nonlocal_bind sysctl, binding to a non-local address will actually succeed, so we can't rely on it to fail in general. The visible issue with the existing behaviour is that we would reset any outbound connection to non-local addresses, if non-local binds are enabled. Keep the significant optimisation for local addresses along with the bind() call, but if it succeeds, don't draw any conclusion: close the socket, grab another one, and proceed normally. This will incur a small latency penalty if non-local binds are enabled (we'll likely fetch an existing socket from the pool but additionally call close()), or if the target is local but not bound: we'll need to call connect() and get a failure before relaying that failure back. Link: https://github.com/containers/podman/issues/23003 Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- v2: Avoid (bogus) reports of uninitialised 'sa' in bind() using an assertion on 'af' (it must be AF_INET or AF_INET6) tcp.c | 48 +++++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 17 deletions(-) diff --git a/tcp.c b/tcp.c index 231f63b..698e7ec 100644 --- a/tcp.c +++ b/tcp.c @@ -1623,6 +1623,9 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, flow_initiate(flow, PIF_TAP); + flow_target(flow, PIF_HOST); + conn = FLOW_SET_TYPE(flow, FLOW_TCP, tcp); + if (af == AF_INET) { if (IN4_IS_ADDR_UNSPECIFIED(saddr) || IN4_IS_ADDR_BROADCAST(saddr) || @@ -1639,6 +1642,9 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, dstport); goto cancel; } + + sa = (struct sockaddr *)&addr4; + sl = sizeof(addr4); } else if (af == AF_INET6) { if (IN6_IS_ADDR_UNSPECIFIED(saddr) || IN6_IS_ADDR_MULTICAST(saddr) || srcport == 0 || @@ -1653,6 +1659,11 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, dstport); goto cancel; } + + sa = (struct sockaddr *)&addr6; + sl = sizeof(addr6); + } else { + ASSERT(0); } if ((s = tcp_conn_sock(c, af)) < 0) @@ -1665,6 +1676,26 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, addr6.sin6_addr = in6addr_loopback; } + /* Use bind() to check if the target address is local (EADDRINUSE or + * similar) and already bound, and set the LOCAL flag in that case. + * + * If bind() succeeds, in general, we could infer that nobody (else) is + * listening on that address and port and reset the connection attempt + * early, but we can't rely on that if non-local binds are enabled, + * because bind() would succeed for any non-local address we can reach. + * + * So, if bind() succeeds, close the socket, get a new one, and proceed. + */ + if (bind(s, sa, sl)) { + if (errno != EADDRNOTAVAIL && errno != EACCES) + conn_flag(c, conn, LOCAL); + } else { + /* Not a local, bound destination, inconclusive test */ + close(s); + if ((s = tcp_conn_sock(c, af)) < 0) + goto cancel; + } + if (af == AF_INET6 && IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr)) { struct sockaddr_in6 addr6_ll = { .sin6_family = AF_INET6, @@ -1675,8 +1706,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, goto cancel; } - flow_target(flow, PIF_HOST); - conn = FLOW_SET_TYPE(flow, FLOW_TCP, tcp); conn->sock = s; conn->timer = -1; conn_event(c, conn, TAP_SYN_RCVD); @@ -1698,14 +1727,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, inany_from_af(&conn->faddr, af, daddr); - if (af == AF_INET) { - sa = (struct sockaddr *)&addr4; - sl = sizeof(addr4); - } else { - sa = (struct sockaddr *)&addr6; - sl = sizeof(addr6); - } - conn->fport = dstport; conn->eport = srcport; @@ -1718,13 +1739,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, tcp_hash_insert(c, conn); - if (!bind(s, sa, sl)) { - tcp_rst(c, conn); /* Nobody is listening then */ - goto cancel; - } - if (errno != EADDRNOTAVAIL && errno != EACCES) - conn_flag(c, conn, LOCAL); - if ((af == AF_INET && !IN4_IS_ADDR_LOOPBACK(&addr4.sin_addr)) || (af == AF_INET6 && !IN6_IS_ADDR_LOOPBACK(&addr6.sin6_addr) && !IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr))) -- 2.43.0

2 1

[PATCH] netlink: Strip nexthop identifiers when duplicating routes
by Stefano Brivio 19 Jun '24

19 Jun '24

If routing daemons set up host routes, for example FRR via OSPF as in the reported issue, they might add nexthop identifiers (not objects) that are generally not valid in the target namespace. Strip them off as well, otherwise we'll get EINVAL from the kernel. Link: https://github.com/containers/podman/issues/22960 Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- netlink.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/netlink.c b/netlink.c index 4dbddb2..58822e9 100644 --- a/netlink.c +++ b/netlink.c @@ -608,6 +608,15 @@ int nl_route_dup(int s_src, unsigned int ifi_src, * route invalid in the namespace. Strip off * RTA_PREFSRC attributes to avoid that. */ rta->rta_type = RTA_UNSPEC; + } else if (rta->rta_type == RTA_NH_ID) { + /* Host routes set up via routing protocols + * (e.g. OSPF) might contain a nexthop ID (and + * not nexthop objects, which are taken care of + * in the RTA_MULTIPATH case above) that's not + * valid in the target namespace. Strip those as + * well. + */ + rta->rta_type = RTA_UNSPEC; } } -- 2.43.0

2 1

[PATCH] tcp: Don't rely on bind() to fail to decide that connection target is valid
by Stefano Brivio 18 Jun '24

18 Jun '24

Commit e1a2e2780c91 ("tcp: Check if connection is local or low RTT was seen before using large MSS") added a call to bind() before we issue a connect() to the target for an outbound connection. If bind() fails, but neither with EADDRNOTAVAIL, nor with EACCESS, we can conclude that the target address is a local (host) address, and we can use an unlimited MSS. While at it, according to the reasoning of that commit, if bind() succeeds, we would know right away that nobody is listening at that (local) address and port, and we don't even need to call connect(): we can just fail early and reset the connection attempt. But if non-local binds are enabled via net.ipv4.ip_nonlocal_bind or net.ipv6.ip_nonlocal_bind sysctl, binding to a non-local address will actually succeed, so we can't rely on it to fail in general. The visible issue with the existing behaviour is that we would reset any outbound connection to non-local addresses, if non-local binds are enabled. Keep the significant optimisation for local addresses along with the bind() call, but if it succeeds, don't draw any conclusion: close the socket, grab another one, and proceed normally. This will incur a small latency penalty if non-local binds are enabled (we'll likely fetch an existing socket from the pool but additionally call close()), or if the target is local but not bound: we'll need to call connect() and get a failure before relaying that failure back. Link: https://github.com/containers/podman/issues/23003 Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com> --- tcp.c | 48 ++++++++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 18 deletions(-) diff --git a/tcp.c b/tcp.c index 231f63b..fd1c550 100644 --- a/tcp.c +++ b/tcp.c @@ -1615,14 +1615,17 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, const struct sockaddr *sa; struct tcp_tap_conn *conn; union flow *flow; + socklen_t sl = 0; int s = -1, mss; - socklen_t sl; if (!(flow = flow_alloc())) return; flow_initiate(flow, PIF_TAP); + flow_target(flow, PIF_HOST); + conn = FLOW_SET_TYPE(flow, FLOW_TCP, tcp); + if (af == AF_INET) { if (IN4_IS_ADDR_UNSPECIFIED(saddr) || IN4_IS_ADDR_BROADCAST(saddr) || @@ -1639,6 +1642,9 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, dstport); goto cancel; } + + sa = (struct sockaddr *)&addr4; + sl = sizeof(addr4); } else if (af == AF_INET6) { if (IN6_IS_ADDR_UNSPECIFIED(saddr) || IN6_IS_ADDR_MULTICAST(saddr) || srcport == 0 || @@ -1653,6 +1659,9 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, dstport); goto cancel; } + + sa = (struct sockaddr *)&addr6; + sl = sizeof(addr6); } if ((s = tcp_conn_sock(c, af)) < 0) @@ -1665,6 +1674,26 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, addr6.sin6_addr = in6addr_loopback; } + /* Use bind() to check if the target address is local (EADDRINUSE or + * similar) and already bound, and set the LOCAL flag in that case. + * + * If bind() succeeds, in general, we could infer that nobody (else) is + * listening on that address and port and reset the connection attempt + * early, but we can't rely on that if non-local binds are enabled, + * because bind() would succeed for any non-local address we can reach. + * + * So, if bind() succeeds, close the socket, get a new one, and proceed. + */ + if (bind(s, sa, sl)) { + if (errno != EADDRNOTAVAIL && errno != EACCES) + conn_flag(c, conn, LOCAL); + } else { + /* Not a local, bound destination, inconclusive test */ + close(s); + if ((s = tcp_conn_sock(c, af)) < 0) + goto cancel; + } + if (af == AF_INET6 && IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr)) { struct sockaddr_in6 addr6_ll = { .sin6_family = AF_INET6, @@ -1675,8 +1704,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, goto cancel; } - flow_target(flow, PIF_HOST); - conn = FLOW_SET_TYPE(flow, FLOW_TCP, tcp); conn->sock = s; conn->timer = -1; conn_event(c, conn, TAP_SYN_RCVD); @@ -1698,14 +1725,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, inany_from_af(&conn->faddr, af, daddr); - if (af == AF_INET) { - sa = (struct sockaddr *)&addr4; - sl = sizeof(addr4); - } else { - sa = (struct sockaddr *)&addr6; - sl = sizeof(addr6); - } - conn->fport = dstport; conn->eport = srcport; @@ -1718,13 +1737,6 @@ static void tcp_conn_from_tap(struct ctx *c, sa_family_t af, tcp_hash_insert(c, conn); - if (!bind(s, sa, sl)) { - tcp_rst(c, conn); /* Nobody is listening then */ - goto cancel; - } - if (errno != EADDRNOTAVAIL && errno != EACCES) - conn_flag(c, conn, LOCAL); - if ((af == AF_INET && !IN4_IS_ADDR_LOOPBACK(&addr4.sin_addr)) || (af == AF_INET6 && !IN6_IS_ADDR_LOOPBACK(&addr6.sin6_addr) && !IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr))) -- 2.43.0

1 0

[PATCH v2 0/4] Even more flow table preliminaries
by David Gibson 14 Jun '24

14 Jun '24

I hoped that the last batch was the last, but I was wrong. Working on UDP flow has shown up a few more things that make sense to do before taking the leap into full flow table implementation. Here's what I have so far, though there could be even more. Changes since v1: * Assorted minor style and comment changes based on Stefano's review. David Gibson (4): util: Split construction of bind socket address from the rest of sock_l4() udp: Fold checking of splice flag into udp_mmh_splice_port() udp: Rework how we divide queued datagrams between sending methods udp: Move management of udp[46]_localname into udp_splice_send() udp.c | 176 +++++++++++++++++++++++++++++++++------------------------ util.c | 123 +++++++++++++++++++++++----------------- 2 files changed, 171 insertions(+), 128 deletions(-) -- 2.45.2

2 5

[PATCH 0/4] Even more flow table preliminaries
by David Gibson 14 Jun '24

14 Jun '24

I hoped that the last batch was the last, but I was wrong. Working on UDP flow has shown up a few more things that make sense to do before taking the leap into full flow table implementation. Here's what I have so far, though there could be even more. David Gibson (4): util: Split construction of bind socket address from the rest of sock_l4() udp: Fold checking of splice flag into udp_mmh_splice_port() udp: Rework how we divide queued datagrams between sending methods udp: Move management of udp[46]_localname into udp_splice_send() udp.c | 175 ++++++++++++++++++++++++++++++++------------------------- util.c | 123 +++++++++++++++++++++++----------------- 2 files changed, 170 insertions(+), 128 deletions(-) -- 2.45.1

2 10

[PATCH v6 0/8] Add vhost-user support to passt (part 2)
by Laurent Vivier 13 Jun '24

13 Jun '24

Extract buffers management code from tcp.c and move it to tcp_buf.c tcp.c keeps all the generic code and will be also used by the vhost-user functions. Also compare mode to MODE_PASTA, as we will manage vhost-user mode (MODE_VU) like MODE_PASST. v6: - reorder declarations, align summing, add curly brackets - rename tap_handler_all() to tap_handler() - rename packet_add_all_do() to tap_add_packet and remove func and line. - rename pool_flush_all() to tap_flush_pools() - rename tcp_fill_flag_header() to tcp_prepare_flags() - set optlen to 0 in tcp_prepare_flags() v5: - remove: [PATCH v4 01/10] tcp: inline tcp_l2_buf_fill_headers() - merge [PATCH v4 09/10] tcp: remove tap_hdr parameter into tcp: extract buffer management from tcp_send_flag() - update comments v4: - remove "tcp: extract buffer management from tcp_conn_tap_mss()" as the MSS size can be the same between socket and vhost-user. - rename tcp_send_flag() and tcp_data_from_sock() to tcp_buf_send_flag() and tcp_buf_data_from_sock() v3: - add 3 new patches tap: use in->buf_size rather than sizeof(pkt_buf) tcp: remove tap_hdr parameter iov: remove iov_copy() v2: - compare to MODE_PASTA in conf_open_files() too - move taph out of udp_update_hdr4()/udp_update_hdr6() Laurent Vivier (8): tcp: extract buffer management from tcp_send_flag() tcp: move buffers management functions to their own file tap: refactor packets handling functions udp: refactor UDP header update functions udp: rename udp_sock_handler() to udp_buf_sock_handler() vhost-user: compare mode MODE_PASTA and not MODE_PASST iov: remove iov_copy() tap: use in->buf_size rather than sizeof(pkt_buf) Makefile | 5 +- conf.c | 14 +- iov.c | 39 ---- iov.h | 3 - isolation.c | 10 +- passt.c | 4 +- tap.c | 134 +++++++----- tap.h | 3 + tcp.c | 580 ++++--------------------------------------------- tcp_buf.c | 513 +++++++++++++++++++++++++++++++++++++++++++ tcp_buf.h | 16 ++ tcp_internal.h | 96 ++++++++ udp.c | 68 +++--- udp.h | 2 +- 14 files changed, 799 insertions(+), 688 deletions(-) create mode 100644 tcp_buf.c create mode 100644 tcp_buf.h create mode 100644 tcp_internal.h -- 2.45.2

3 24

[PATCH v7 0/8] Add vhost-user support to passt (part 2)
by Laurent Vivier 13 Jun '24

13 Jun '24

Extract buffers management code from tcp.c and move it to tcp_buf.c tcp.c keeps all the generic code and will be also used by the vhost-user functions. Also compare mode to MODE_PASTA, as we will manage vhost-user mode (MODE_VU) like MODE_PASST. v7: - update comments (tap_flush_pools(), func and line) - drop "-L4" in tcp_buf.c header - fix *optlen initializatio - fix tcp4_flags_used/tcp6_flags_used value on error - fix seq_to_tap value v6: - reorder declarations, align summing, add curly brackets - rename tap_handler_all() to tap_handler() - rename packet_add_all_do() to tap_add_packet and remove func and line. - rename pool_flush_all() to tap_flush_pools() - rename tcp_fill_flag_header() to tcp_prepare_flags() - set optlen to 0 in tcp_prepare_flags() v5: - remove: [PATCH v4 01/10] tcp: inline tcp_l2_buf_fill_headers() - merge [PATCH v4 09/10] tcp: remove tap_hdr parameter into tcp: extract buffer management from tcp_send_flag() - update comments v4: - remove "tcp: extract buffer management from tcp_conn_tap_mss()" as the MSS size can be the same between socket and vhost-user. - rename tcp_send_flag() and tcp_data_from_sock() to tcp_buf_send_flag() and tcp_buf_data_from_sock() v3: - add 3 new patches tap: use in->buf_size rather than sizeof(pkt_buf) tcp: remove tap_hdr parameter iov: remove iov_copy() v2: - compare to MODE_PASTA in conf_open_files() too - move taph out of udp_update_hdr4()/udp_update_hdr6() Laurent Vivier (8): tcp: extract buffer management from tcp_send_flag() tcp: move buffers management functions to their own file tap: refactor packets handling functions udp: refactor UDP header update functions udp: rename udp_sock_handler() to udp_buf_sock_handler() vhost-user: compare mode MODE_PASTA and not MODE_PASST iov: remove iov_copy() tap: use in->buf_size rather than sizeof(pkt_buf) Makefile | 5 +- conf.c | 14 +- iov.c | 39 ---- iov.h | 3 - isolation.c | 10 +- passt.c | 4 +- tap.c | 132 ++++++----- tap.h | 3 + tcp.c | 580 ++++--------------------------------------------- tcp_buf.c | 519 +++++++++++++++++++++++++++++++++++++++++++ tcp_buf.h | 16 ++ tcp_internal.h | 96 ++++++++ udp.c | 68 +++--- udp.h | 2 +- 14 files changed, 803 insertions(+), 688 deletions(-) create mode 100644 tcp_buf.c create mode 100644 tcp_buf.h create mode 100644 tcp_internal.h -- 2.45.2

2 11

[PATCH v5 0/8] Add vhost-user support to passt (part 2)
by Laurent Vivier 12 Jun '24

12 Jun '24

Extract buffers management code from tcp.c and move it to tcp_buf.c tcp.c keeps all the generic code and will be also used by the vhost-user functions. Also compare mode to MODE_PASTA, as we will manage vhost-user mode (MODE_VU) like MODE_PASST. v5: - remove: [PATCH v4 01/10] tcp: inline tcp_l2_buf_fill_headers() - merge [PATCH v4 09/10] tcp: remove tap_hdr parameter into tcp: extract buffer management from tcp_send_flag() - update comments v4: - remove "tcp: extract buffer management from tcp_conn_tap_mss()" as the MSS size can be the same between socket and vhost-user. - rename tcp_send_flag() and tcp_data_from_sock() to tcp_buf_send_flag() and tcp_buf_data_from_sock() v3: - add 3 new patches tap: use in->buf_size rather than sizeof(pkt_buf) tcp: remove tap_hdr parameter iov: remove iov_copy() v2: - compare to MODE_PASTA in conf_open_files() too - move taph out of udp_update_hdr4()/udp_update_hdr6() Laurent Vivier (8): tcp: extract buffer management from tcp_send_flag() tcp: move buffers management functions to their own file tap: refactor packets handling functions udp: refactor UDP header update functions udp: rename udp_sock_handler() to udp_buf_sock_handler() vhost-user: compare mode MODE_PASTA and not MODE_PASST iov: remove iov_copy() tap: use in->buf_size rather than sizeof(pkt_buf) Makefile | 5 +- conf.c | 14 +- iov.c | 39 ---- iov.h | 3 - isolation.c | 10 +- passt.c | 4 +- tap.c | 135 ++++++------ tap.h | 7 + tcp.c | 554 +++---------------------------------------------- tcp_buf.c | 489 +++++++++++++++++++++++++++++++++++++++++++ tcp_buf.h | 16 ++ tcp_internal.h | 96 +++++++++ udp.c | 68 +++--- udp.h | 2 +- 14 files changed, 771 insertions(+), 671 deletions(-) create mode 100644 tcp_buf.c create mode 100644 tcp_buf.h create mode 100644 tcp_internal.h -- 2.44.0

3 25