We have a number of delays when we switch to new layouts that were
added to make the tests visually easier to follow, together with
blinking status bars. Shorten the delays and avoid blinking the
status bar if $FAST is set to 1 (no demo mode).
Shorten delays in busy loops to 10ms, instead of 100ms, and skip the
one-second fixed delay when we wait for the status of a command.
Cut the duration of throughput and latency tests to one second, down
from ten. Somewhat surprisingly, the results we get are rather
consistent, and not significantly different from what we'd get with
10 seconds.
This, together with Podman's commit 20f3e8909e3a ("test/system:
pasta_test_do add explicit port check"), cuts the time needed on my
setup for full test run from approximately 37 minutes to...:
$ time ./run
[exited]
PASS: 165, FAIL: 0
Log at /home/sbrivio/passt/test/test_logs/test.log
real 15m34.253s
user 0m0.011s
sys 0m0.011s
Signed-off-by: Stefano Brivio <sbrivio(a)redhat.com>
---
test/lib/layout | 14 +++++++-------
test/lib/term | 31 +++++++++++++++----------------
test/lib/test | 2 +-
test/pasta_options/log_to_file | 4 ++--
test/perf/passt_tcp | 18 +++++++++---------
test/perf/passt_udp | 2 +-
test/perf/pasta_tcp | 34 +++++++++++++++++-----------------
test/perf/pasta_udp | 2 +-
8 files changed, 53 insertions(+), 54 deletions(-)
diff --git a/test/lib/layout b/test/lib/layout
index f9a1cf1..4d03572 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -15,7 +15,7 @@
# layout_pasta() - Panes for host, pasta, and separate one for namespace
layout_pasta() {
- sleep 3
+ sleep 1
tmux kill-pane -a -t 0
cmd_write 0 clear
@@ -46,7 +46,7 @@ layout_pasta() {
# layout_passt() - Panes for host, passt, and guest
layout_passt() {
- sleep 3
+ sleep 1
tmux kill-pane -a -t 0
cmd_write 0 clear
@@ -77,7 +77,7 @@ layout_passt() {
# layout_passt_in_pasta() - Host, passt within pasta, namespace and guest
layout_passt_in_pasta() {
- sleep 3
+ sleep 1
tmux kill-pane -a -t 0
cmd_write 0 clear
@@ -113,7 +113,7 @@ layout_passt_in_pasta() {
# layout_two_guests() - Two guest panes, two passt panes, plus host and log
layout_two_guests() {
- sleep 3
+ sleep 1
tmux kill-pane -a -t 0
cmd_write 0 clear
@@ -152,7 +152,7 @@ layout_two_guests() {
# layout_demo_pasta() - Four panes for pasta demo
layout_demo_pasta() {
- sleep 3
+ sleep 1
cmd_write 0 cd ${BASEPATH}
cmd_write 0 clear
@@ -188,7 +188,7 @@ layout_demo_pasta() {
# layout_demo_passt() - Four panes for passt demo
layout_demo_passt() {
- sleep 3
+ sleep 1
cmd_write 0 cd ${BASEPATH}
cmd_write 0 clear
@@ -224,7 +224,7 @@ layout_demo_passt() {
# layout_demo_podman() - Four panes for pasta demo with Podman
layout_demo_podman() {
- sleep 3
+ sleep 1
cmd_write 0 cd ${BASEPATH}
cmd_write 0 clear
diff --git a/test/lib/term b/test/lib/term
index 262937e..3834092 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -97,7 +97,6 @@ display_delay() {
switch_pane() {
tmux select-pane -t ${1}
PR_DELAY=${PR_DELAY_INIT}
- display_delay "0.2"
}
# cmd_write() - Write a command to a pane, letter by letter, and execute it
@@ -199,7 +198,7 @@ pane_run() {
# $1: Pane name
pane_wait() {
__lc="$(echo "${1}" | tr [A-Z] [a-z])"
- sleep 0.1 || sleep 1
+ sleep 0.01 || sleep 1
__done=0
while
@@ -207,7 +206,7 @@ pane_wait() {
case ${__l} in
*"$ " | *"# ") return ;;
esac
- do sleep 0.1 || sleep 1; done
+ do sleep 0.01 || sleep 1; done
}
# pane_parse() - Print last line, @EMPTY@ if command had no output
@@ -231,7 +230,7 @@ pane_status() {
__status="$(pane_parse "${1}")"
while ! [ "${__status}" -eq "${__status}" ] 2>/dev/null; do
- sleep 1
+ sleep 0.01 || sleep 1
pane_run "${1}" 'echo $?'
pane_wait "${1}"
__status="$(pane_parse "${1}")"
@@ -383,6 +382,16 @@ info_check_failed() {
printf " < failed.\n" >> "${LOGFILE}"
}
+# status_bar_blink() - Make status bar blink
+status_bar_blink() {
+ for i in `seq 1 3`; do
+ tmux set status-right-style 'bg=colour1 fg=colour196 bold'
+ sleep 0.1 || sleep 1
+ tmux set status-right-style 'bg=colour1 fg=colour233 bold'
+ sleep 0.1 || sleep 1
+ done
+}
+
# info_passed() - Display, log, and make status bar blink when a test passes
info_passed() {
switch_pane ${PANE_INFO}
@@ -391,12 +400,7 @@ info_passed() {
log "...passed."
log
- for i in `seq 1 3`; do
- tmux set status-right-style 'bg=colour1 fg=colour2 bold'
- sleep "0.1"
- tmux set status-right-style 'bg=colour1 fg=colour233 bold'
- sleep "0.1"
- done
+ [ ${FAST} -eq 1 ] || status_bar_blink
}
# info_failed() - Display, log, and make status bar blink when a test passes
@@ -407,12 +411,7 @@ info_failed() {
log "...failed."
log
- for i in `seq 1 3`; do
- tmux set status-right-style 'bg=colour1 fg=colour196 bold'
- sleep "0.1"
- tmux set status-right-style 'bg=colour1 fg=colour233 bold'
- sleep "0.1"
- done
+ [ ${FAST} -eq 1 ] || status_bar_blink
pause_continue \
"Press any key to pause test session" \
diff --git a/test/lib/test b/test/lib/test
index c525f8e..e6726be 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -33,7 +33,7 @@ test_iperf3k() {
pane_or_context_run "${__sctx}" 'kill -INT $(cat s.pid); rm s.pid'
- sleep 3 # Wait for kernel to free up ports
+ sleep 1 # Wait for kernel to free up ports
}
# test_iperf3() - Ugly helper for iperf3 directive
diff --git a/test/pasta_options/log_to_file b/test/pasta_options/log_to_file
index fe50e50..3ead06c 100644
--- a/test/pasta_options/log_to_file
+++ b/test/pasta_options/log_to_file
@@ -19,7 +19,7 @@ sleep 1
endef
def flood_log_client
-host tcp_crr --nolog -P 10001 -C 10002 -6 -c -H ::1
+host tcp_crr --nolog -l1 -P 10001 -C 10002 -6 -c -H ::1
endef
def check_log_size_mountns
@@ -42,7 +42,7 @@ pout PID2 echo $!
check head -1 __LOG_FILE__ | grep '^pasta .* [(]__PID2__[)]$'
test Maximum log size
-passtb ./pasta --config-net -d -f -l __LOG_FILE__ --log-size $((100 * 1024)) -- sh -c
'while true; do tcp_crr --nolog -P 10001 -C 10002 -6; done'
+passtb ./pasta --config-net -d -f -l __LOG_FILE__ --log-size $((100 * 1024)) -- sh -c
'while true; do tcp_crr --nolog -l1 -P 10001 -C 10002 -6; done'
sleep 1
flood_log_client
diff --git a/test/perf/passt_tcp b/test/perf/passt_tcp
index 14343cb..695479f 100644
--- a/test/perf/passt_tcp
+++ b/test/perf/passt_tcp
@@ -38,7 +38,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 /
2 ) / 10^6\n' $(cat /sy
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo
__FREQ_PROCFS__
set THREADS 4
-set TIME 10
+set TIME 1
set OMIT 0.1
set OPTS -Z -P __THREADS__ -l 1M -O__OMIT__
@@ -75,7 +75,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -6
-gout LAT tcp_rr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_rr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv6: guest to host
@@ -85,7 +85,7 @@ lat -
lat -
lat -
nsb tcp_crr --nolog -6
-gout LAT tcp_crr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_crr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 400
tr TCP throughput over IPv4: guest to host
@@ -119,7 +119,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -4
-gout LAT tcp_rr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_rr --nolog -l1 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv4: guest to host
@@ -129,7 +129,7 @@ lat -
lat -
lat -
nsb tcp_crr --nolog -4
-gout LAT tcp_crr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_crr --nolog -l1 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 400
tr TCP throughput over IPv6: host to guest
@@ -153,7 +153,7 @@ lat -
lat -
guestb tcp_rr --nolog -P 10001 -C 10011 -6
sleep 1
-nsout LAT tcp_rr --nolog -P 10001 -C 10011 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10001 -C 10011 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv6: host to guest
@@ -164,7 +164,7 @@ lat -
lat -
guestb tcp_crr --nolog -P 10001 -C 10011 -6
sleep 1
-nsout LAT tcp_crr --nolog -P 10001 -C 10011 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10001 -C 10011 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 350
@@ -189,7 +189,7 @@ lat -
lat -
guestb tcp_rr --nolog -P 10001 -C 10011 -4
sleep 1
-nsout LAT tcp_rr --nolog -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv6: host to guest
@@ -200,7 +200,7 @@ lat -
lat -
guestb tcp_crr --nolog -P 10001 -C 10011 -4
sleep 1
-nsout LAT tcp_crr --nolog -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 300
te
diff --git a/test/perf/passt_udp b/test/perf/passt_udp
index 8919280..f25c903 100644
--- a/test/perf/passt_udp
+++ b/test/perf/passt_udp
@@ -31,7 +31,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 /
2 ) / 10^6\n' $(cat /sy
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo
__FREQ_PROCFS__
set THREADS 2
-set TIME 10
+set TIME 1
set OPTS -u -P __THREADS__ --pacing-timer 1000
info Throughput in Gbps, latency in µs, __THREADS__ threads at __FREQ__ GHz
diff --git a/test/perf/pasta_tcp b/test/perf/pasta_tcp
index 8d2f911..a443f5a 100644
--- a/test/perf/pasta_tcp
+++ b/test/perf/pasta_tcp
@@ -22,7 +22,7 @@ ns /sbin/sysctl -w net.ipv4.tcp_timestamps=0
set THREADS 4
-set TIME 10
+set TIME 1
set OMIT 0.1
set OPTS -Z -w 4M -l 1M -P __THREADS__ -O__OMIT__
@@ -46,13 +46,13 @@ iperf3k host
tl TCP RR latency over IPv6: ns to host
hostb tcp_rr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_rr --nolog -P 10003 -C 10013 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
tl TCP CRR latency over IPv6: ns to host
hostb tcp_crr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_crr --nolog -P 10003 -C 10013 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 500 350
@@ -67,13 +67,13 @@ iperf3k host
tl TCP RR latency over IPv4: ns to host
hostb tcp_rr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_rr --nolog -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
tl TCP CRR latency over IPv4: ns to host
hostb tcp_crr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_crr --nolog -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 500 350
@@ -87,13 +87,13 @@ iperf3k ns
tl TCP RR latency over IPv6: host to ns
nsb tcp_rr --nolog -P 10002 -C 10012 -6
-hout LAT tcp_rr --nolog -P 10002 -C 10012 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 150 100
tl TCP CRR latency over IPv6: host to ns
nsb tcp_crr --nolog -P 10002 -C 10012 -6
-hout LAT tcp_crr --nolog -P 10002 -C 10012 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -6 -c -H ::1 | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 1000 700
@@ -108,13 +108,13 @@ iperf3k ns
tl TCP RR latency over IPv4: host to ns
nsb tcp_rr --nolog -P 10002 -C 10012 -4
-hout LAT tcp_rr --nolog -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 150 100
tl TCP CRR latency over IPv4: host to ns
nsb tcp_crr --nolog -P 10002 -C 10012 -4
-hout LAT tcp_crr --nolog -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 1000 700
@@ -156,7 +156,7 @@ lat -
lat -
lat -
hostb tcp_rr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_rr --nolog -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
@@ -165,7 +165,7 @@ lat -
lat -
lat -
hostb tcp_crr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_crr --nolog -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 1500 500
@@ -193,7 +193,7 @@ lat -
lat -
lat -
hostb tcp_rr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_rr --nolog -P 10003 -C 10013 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
@@ -202,7 +202,7 @@ lat -
lat -
lat -
hostb tcp_crr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_crr --nolog -P 10003 -C 10013 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n
's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 1500 500
@@ -224,7 +224,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -P 10002 -C 10012 -6
-hout LAT tcp_rr --nolog -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 150 100
@@ -234,7 +234,7 @@ lat -
lat -
sleep 1
nsb tcp_crr --nolog -P 10002 -C 10012 -6
-hout LAT tcp_crr --nolog -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 5000 10000
@@ -256,7 +256,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -P 10002 -C 10012 -4
-hout LAT tcp_rr --nolog -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 150 100
@@ -266,7 +266,7 @@ lat -
lat -
sleep 1
nsb tcp_crr --nolog -P 10002 -C 10012 -4
-hout LAT tcp_crr --nolog -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n
's/^throughput=\(.*\)/\1/p'
+hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n
's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 5000 10000
diff --git a/test/perf/pasta_udp b/test/perf/pasta_udp
index 6acbfd3..9fed62e 100644
--- a/test/perf/pasta_udp
+++ b/test/perf/pasta_udp
@@ -21,7 +21,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 /
2 ) / 10^6\n' $(cat /sy
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo
__FREQ_PROCFS__
set THREADS 1
-set TIME 10
+set TIME 1
set OPTS -u -P __THREADS__
info Throughput in Gbps, latency in µs, one thread at __FREQ__ GHz
--
2.43.0